MDA-2-HV
1x2 Mobile, Ground Loop Blocking, Video Distribution Amplifier, Coax
FEATURES:
 ·1x2 Distribution amp
·Ground Loop Blocking inputs
·Variable gain control
·Variable HF compensation
·Wide Input Voltage Range, AC or DC
·Low Power Consumption
·Made in the USA
   

The MDA-2-HV is a Differential input, high performance 1x2 Color Video Distribution Amplifier in a compact chassis. The MDA-2-HV has gain and high frequency controls to compensate for signal loss, and the differential input amplifier is used to minimize or eliminate ground loop problems. This unit is designed to use the power source of the camera that is feeding the unit. This product will work with a negative or positive ground system. Any power source other than a standard CVS supplied power supply must be fused on the (+) or "Hot" leg for safety reasons. This product is designed to be used in the field where normal AC power is not available. Battery or solar sources are good as well as AC inverters.
SPECIFICATIONS
VIDEO
Input: Composite Video
Input Connectors: BNC
Input Level: 1vpp Into 75 Ohms
Input Impedance: 75 ohm +/-5%
Output: 2x Per Input
Output Connector: BNC
Output Impedance: 75 ohm +/-5%
Gain In / Out +/-3dB Minimum
Diff Gain: <.05%
Diff Phase: <.05º
Frequency Response: 0-65mHz
H Tilt: <1%
V Tilt: <1%
CCMR: Type. 60dB @ 4Mhz
High Freq. Boost: Type 0+/- 8dB Minimum
POWER REQUIREMENTS
AC/DC Operation: 10-30 VAC
  7-40 VDC
DC Power Draw: <1w
Power Connector: 2 Pos. Terminal Strip
MECHANICAL
Size: 1.75"W x 4"D x 1"H
Weight: <1 lbs
MTBF: TBD
Temperature Range: -35ºC - +70ºC
All Specifications Are Subject To Change Without Prior Notification
 
Copyright 2010. Compu-Video Systems Inc. All Rights Reserved.
P.O. Box 749 Peekskill, NY 10566    Phone:(845) 737-7009   Fax:(845) 737-0426