| |
|
FDABS-11 |
|
|
1x2
Ground Loop Blocking,
Active Transmitter Board, UTP / CAT-5 |
|
FEATURES:
·1x2 UTP
Distribution amp
·UTP and
Coax Input
·Ground
Loop Blocking Input
·Passive
or active receivers
·Plugs
into the CH-1 or CH-16 systems
·High
quality Color video performance
·Industrial grade specifications
·Variable gain control
·Made in
the USA
|
|
|
 |
 |
|
|
|
|
|
The FDABS-11
is a Coax or UTP input, ground loop blocking, high
performance 1x2 UTP Color Video distribution
Amplifier
board that plugs into the CH-1 or CH-16 systems. The
FDABS-11 has a gain adjust to compensate for signal
level loss. The differential input amplifier is used
to minimize or eliminate ground loop problems and
the active UTP outputs can drive either active or
passive receivers. For 1x1 operation use only the
output needed and simply leave the unused one
unterminated.
|
|
|
SPECIFICATIONS |
|
|
VIDEO |
|
Input(1): |
Coax or UTP / CAT-5 |
|
Input Connectors: |
BNC & Terminal Strip |
|
Input Level: |
1vpp |
|
Input Impedance: |
75 ohm +/-5% (Coax) |
|
|
100 ohms (UTP / CAT-5)
|
|
Output(2): |
2x Per Input UTP / CAT-5 |
|
Output Connector: |
2pos. Terminal Strip |
|
Output Impedance: |
50 ohms +/-5% (UTP / CAT-5)
|
|
Gain In / Out |
+/-3dB |
|
Diff Gain: |
<1% |
|
Diff Phase: |
<1° |
|
Frequency Response: |
0-15mHz +/- .5dB |
|
Power / Supply Hum: |
<63dB |
|
H Tilt: |
<1% |
|
V Tilt: |
<1% |
|
CCMR: |
Type. 60dB @ 4Mhz |
All
Specifications Are Subject To Change Without
Prior Notification
|
|
| |
