| |
|
FDA-12 |
|
|
1x2
Ground Loop Blocking,
Active Transmitter, UTP / CAT-5 |
|
FEATURES:
·1x2 UTP
Distribution amp
·UTP / Coax
Inputs
·Ground Loop
Blocking Input
·Passive or
active receivers
·High quality
Color video performance
·Industrial grade
specifications
·Variable gain
control
·UL listed Power
Supply
|
|
|
 |
 |
 |
 |
 |
|
|
The FDA-12 is
a Coax / UTP input, ground loop blocking, high
performance 1x2 UTP Color Video Active Transmitter.
The FDA-12 has a gain adjust to compensate for
signal level loss. The differential input
amplifier is used to minimize or eliminate ground
loop problems and the active UTP outputs can drive
either active or passive receivers. For 1x1
operation use only the output needed and simply
leave the unused one unterminated.
|
|
|
SPECIFICATIONS |
|
|
VIDEO |
|
Input(1): |
Coax or UTP / CAT-5 |
|
Input Connectors: |
BNC & Terminal Strip |
|
Input Level: |
1vpp |
|
Input Impedance: |
75 ohm +/-5% (Coax) |
|
|
100 ohms (UTP / CAT-5)
|
|
Output(2): |
2x Per Input |
|
Output Connector: |
2 pos. Terminal Strip (UTP / CAT-5) |
|
Output Impedance: |
50 ohms +/-5% (UTP / CAT-5)
|
|
Gain In / Out |
+/-3dB |
|
Diff Gain: |
<1% |
|
Diff Phase: |
<1° |
|
Frequency Response: |
0-15mHz +/- .5dB |
|
Power / Supply Hum: |
<63dB |
|
H Tilt: |
<1% |
|
V Tilt: |
<1% |
|
CCMR: |
Type. 60dB @ 4Mhz |
|
POWER
REQUIREMENTS |
|
DC Operation: |
12 to 18 VDC Isolated Source |
|
AC Power Draw: |
Depends On Card Installed In Unit |
|
Power Connector: |
3.5mm Phono |
|
MECHANICAL |
|
Size: |
5.50"W x 6.25"D x 1.6"H |
|
Weight: |
1 lbs |
All
Specifications Are Subject To Change Without
Prior Notification
|
|
| |
