DALCBS-1432
1x4 Looping, Video Distribution Amplifier, Board
FEATURES:
·1x4 Distribution Amp.
·High Quality Color Video Performance
·Has 1 Looping Output
·Industrial Grade Specifications
·Variable Gain Control
·HF Compensation
·Fits The CH-1 & CH-32 Chassis
·Made in the USA
     
The DALCBS-1432 is a high performance 1x4 looping input color video distribution amplifier board that plugs into the CH-1, and CH-32 systems. This unit is designed to distribute a signal from a coax control system without interfering with the imbedded control signal on the looping Input. The DALCBS-1432 does not remove the imbedded signal from the video but eliminates the two way ability on its active outputs. Unused looping outputs must be terminated in 75 ohms, terminators which are available from Compu-Video Systems or can be made with the 75ohm resistors included with the unit.  The outputs can be used with baluns or active receivers, however all must be the same.
SPECIFICATIONS
VIDEO
Input: Composite Video
Input Connectors: BNC
Input Level: 1.0vpp Into 75 Ohms
Input Impedance: 75 ohm +/-5%
Output: 4 CAT-5 Outputs
Output Connector: 2 Pos. Terminal Strips
Output Impedance:

50 ohm +/-5% Source Term.
Gain In / Out +/-3dB
Diff Gain: <1%
Diff Phase: <1°
Frequency Response: 0-15mHz +/- .5dB
Power / Supply Hum: <63dB
H Tilt: <1%
V Tilt: <1%
CCMR:
Type. 60dB @ 4Mhz
High Freq. Boost:
Type 0+/- 10 dB
 
All Specifications Are Subject To Change Without Prior Notification
 
Copyright 2010. Compu-Video Systems Inc. All Rights Reserved.
P.O. Box 749 Peekskill, NY 10566    Phone:(845) 737-7009   Fax:(845) 737-0426